Magnesium alloy is one of the lightest metal materials, and its mass ratio is only two-thirds of that of aluminum alloy. The market and application potential is huge. With the continuous development of mining, smelting, smelting, molding and other process technologies, more and more magnesium is available. Alloy materials are used in automotive, 3C, building materials, aerospace, rail transit and other fields to drive the development of the entire industrial chain including magnesium alloy smelting equipment.Shenzhen DZ-United Technology Co., Ltd. (hereinafter referred to as "DZ-United Technology") has mastered the mature magnesium alloy furnace manufacturing technology and technology through the introduction of foreign technology and independent innovation. It is the leading magnesium alloy furnace manufacturer in the industry. Founded in 2009, the company is located in Guangming New District, Shenzhen. It is mainly engaged in various cold and hot room magnesium alloy furnaces and magnesium alloy automation equipment. Equipment manufacturing for upper, middle and lower reaches of customers serving magnesium products.Mr. Cui Bo, General Manager of DZ-United Technology, has nearly 15 years of experience in the field of magnesium alloy furnaces. He has been engaged in research and development in a number of foreign-funded enterprises. He is a reserve-level talent in the field of magnesium and aluminum smelting identified by Shenzhen. R&D and application practice experience. Its founding DZ-United Technology is a national high-tech enterprise, with a number of technical patents for magnesium alloy furnaces, and undertakes a number of technical development projects in the country and Shenzhen. DZ-United Technology is the executive director of the China Foundry Society, a permanent member of the Hong Kong Die Casting Association, a member of the China Magnesium Association; a member of the National Foundry Machinery Standardization Committee (SAC/TC186) and the Metal Thermoforming Subcommittee (SC2), and a shareholding in Shenzhen Qianhai The trading center is listed on the New Fourth Board."DZ-United is one of the earliest companies in the industry to develop magnesium alloy furnaces. It has a complete line of magnesium alloy furnaces for cold and hot chamber die casting machines," said Mr. Cui Bo. "Our magnesium alloy furnace products use bimetallic composite steel sheets. Imported high-precision flowmeter, international famous brand digital temperature control system, large touch screen and Siemens PLC, with advantages of small loss, accurate flow control, stable temperature of soup, easy and convenient operation."According to reports, Dingzhengxin magnesium alloy furnace is made of high temperature resistant bimetallic composite steel plate, anti-oxidation ablation, non-polluting magnesium liquid, long service life; protective gas control adopts imported components from Japan and the United States, flow control is precise and stable; furnace and magnesium The liquid temperature control module is used in Germany to ensure temperature measurement and control, and the temperature deviation is controlled within ±5°C. The 10.2-inch color touch human-machine interface makes operation easier and safer to use.Mr. Cui Bo said: "DZ-United Technology has rich cold and hot room magnesium alloy furnace products, including 160-800T die casting machine supporting hot chamber die casting machine magnesium alloy furnace DMH series, and 200-4000T die casting machine. Cold room magnesium alloy furnace DMD-J series and M/T series."According to reports, magnesium alloy hot chamber die casting machine furnace DMH series, perfect gas protection device, uniform gas mixing, stable flow, adequate protection, equipped with automatic switching device; heating elements work stably, gradually warming, reliable and durable; multiple thermocouple control Furnace and magnesium liquid temperature; automatic alarm device, including over-temperature alarm, side leakage alarm, gas shortage alarm, etc.; the bottom of the furnace is equipped with various specifications of pulleys or slide rails according to the die casting machine model, which is convenient for changing the material pot.Magnesium alloy cold chamber die casting machine furnace DMD series, incorporating patented instantaneous quantitative casting system, the quantitative time is as low as 0.3-2S; can realize the accurate quantification of magnesium liquid less than 100g, up to 30KG; magnesium liquid zero transmission distance, no Flow temperature loss, high product qualification rate; no need to clean the pump and transmission tube every shift, the cleaning cycle can be extended for more than 20 days; special flow meter to precisely control the protective gas flow; Siemens control system to provide stable production guarantee; mature design The program is widely used in the production of mobile phones, power tools and auto parts.Because magnesium alloy has a low melting point and is easy to burn, the safety of magnesium alloy furnace has always been the direction of manufacturers' research and development and the focus of users. With more than ten years of technology accumulation in the field of magnesium alloy furnaces, Ding Zhengxin Technology Magnesium Alloy Furnace has reached the international leading level in terms of safety, and has become the main drafting unit of "Magnesium Alloy Die Casting Furnace Terminology" and "Safety Standard for Magnesium Alloy Die Casting Furnace". And is committed to being the world's safest supplier of magnesium alloy equipment.Mr. Cui Bo said: "In terms of safety, we have made many innovative designs on the equipment for safety protection. For example, there are dozens of alarm devices in our furnace. The new design guarantees electrical safety and prevents magnesium liquid. Combustion, magnesium oxidation; high-level electricity protection to ensure safe use of electricity. In addition, we can remotely control and implement remote monitoring and control of equipment operation. The company's products have obtained a number of international safety certifications, and the products have been exported. To Iran, India, Malaysia, Singapore, South Korea, Germany, the United States and other countries."Mr. Cui Bo introduced: "Technology is the foundation of enterprise development. The company and Beijing University of Science and Technology, Shanghai Jiaotong University, Wuhan University of Science and Technology, Northeastern University, Liaoning University of Technology, Dalian University of Technology, Taiyuan University of Science and Technology, Wuhan University of Science and Technology, Shenyang Foundry Research Institute Colleges and research institutes have established long-term cooperation in production, education and research, and at the same time, they are in line with international standards, and have developed a variety of new materials, new equipment and new processes. The products are energy-saving, high-temperature, wear-resistant, and service life. To achieve or partially exceed the international advanced level, for example, the company's fourth-generation products will achieve energy savings of more than 30%, greatly saving customers' cost of use. Some new products currently being developed by the company will fill the gap in the international part."In addition to the cold and hot chamber die casting machine furnace equipment, DZ-United Technology also develops and produces magnesium alloy special experimental furnace, magnesium alloy semi-solid equipment, magnesium alloy recovery system, magnesium alloy semi-continuous casting system, magnesium and alloy refining system, original Magnesium smelting production line, aluminum-zinc-copper alloy equipment and other special equipment automation equipment, etc., to provide customers with integrated solutions for magnesium alloy furnace equipment and processes.

DZ-United magnesium alloy & Aluminum alloy equipment produced high purity magnesium alloy rod in beaufy Qinghai province,to help China's defense industry.

Electromagnetic melting furnace uses electromagnetic induction heating technology to melt and reprocess metal (magnesium, aluminum, zinc alloy);Our company is fully developed for the development and manufacture of zinc alloy electromagnetic melting furnace series products and special accessories; existing electromagnetic central melting furnace, die casting machine electromagnetic melting furnace (all die casting machine electromagnetic melting furnace can be customized, including Fulai double-chamber double-temperature furnace) , special condenser tube for electromagnetic furnace, 316L stainless steel composite tongs (anti-corrosion, anti-expansion stop without need to feed); product quality can be as long as several years without failure, saving customers money and worry.Several characteristics of electromagnetic furnace: all security, energy saving, environmental protection, convenient and stable.SafetyThe electromagnetic movement produces 20KHZ-25KHZ alternating current, generates corresponding alternating magnetic field through the electromagnetic wire disc, and cuts the metal (clamp pot)Magnetic line and self-induced heat generation (non-contact heating), high impedance of insulation circuit: equipment grounding safety up to 100%;The device housing has no high temperature and can be touched by hand, and the temperature is around 60 °C.Energy savingElectromagnetic heating equipment has a thermal effect of about 95% and a thermal efficiency of 99%;More than 40% than the oil burner, up to 60%;It is about 20% less than the electric furnace, but it is equal to the ratio of the electric heating tube to the pot.It can save customers more than 30,000 per year.Environmental protectionThe electromagnetic melting furnace has no burning and no discharge; it creates a low-temperature environmental protection workshop to give employees a clean and comfortable working environment.Convenient and stableAs long as the power supply of the wire is in place at the installation site, the equipment technology is very mature, the failure rate is low and the maintenance is simple and convenient.The new plant is equipped with an electromagnetic melting furnace, which eliminates the need to lay pipes, install air ducts and exhaust equipment, saves millions of engineering costs, shortens the factory completion period, and environmental protection can be passed at one time.

According to the latest news in the market, the ferrosilicon price of large-scale manufacturers in the northwest region continued to increase, with an increase of 1,000 yuan/ton, and the price of ferrosilicon 72# was 12,800 yuan/ton including factory acceptance. The price of ferrosilicon 75# was 13,000 yuan/ton. .Since December, not only the price of ferrosilicon has skyrocketed, but other raw materials for magnesium metal production, such as dolomite, solvent, magnesium chloride, fluorite, and even rock wool and sulfur powder, have risen in price due to the shortage of spot stocks in winter. , so that the original magnesium production costs remain high. According to the current price of ferrosilicon of 9,500 yuan, the original magnesium cost is still at a high level of over 18,000, and the magnesium plant has a serious loss. In addition, the current magnesium ingot market is weak, and the wait-and-see mood is serious. The magnesium plant is in a dilemma. Under the weight of the double pressure of cost and sales, some magnesium plants in Fugu began to reduce production twice. It is understood that manufacturers that reduce production by more than 50% are: Tianyu, Jin Wantong, Tianlong, Xintian, Huashun, Founder, Zhongxin, Dongxin, Wanxin. The remaining magnesium plants also have different levels of production cuts. The original production in the Fugu area was about 1,400 tons per day. Due to the rising factors of raw materials such as ferrosilicon, the current daily output of the Fugu area is less than 900 tons per day.The Fugu Magnesium Association has learned through research that the current inventory of magnesium ingots is less than 15,000 tons. Due to the implementation of the production reduction strategy in most enterprises, there is no significant increase in inventory. At present, the mainstream price of the Fugu market includes taxed cash of 15,500 yuan / ton, including tax acceptance of 15,800 yuan / ton, the number of transactions is not large. It is related to the wait-and-see attitude of the purchaser, but it is not ruled out that the magnesium factory is reluctant to sell because of the serious cost. In the current magnesium market, the magnesium plant suffered a serious loss and its operating conditions were worrying. If the magnesium price remains unchanged, unless the price of ferrosilicon falls below 7,000 yuan. If the price of ferrosilicon is still firm at more than 9,000 yuan / ton, if the price of magnesium ingots does not reach 17,000 yuan / ton, some magnesium plants have made the worst plans, and are planning to cut production again or even completely stop production to reduce losses.